Easy 3 step Installation!

Step 1: Attach driver housing and mount plate using existing bolt.

Step 2: Attach housing clip using existing bolt.

Step 3: Attach bushing and Saw Guard Dog bar using existing bolt.

PARTS:
● 1-SGD lifting guard bar

● 1-.25” x .25” guard bushing

● 1-Tube hook clip

● 1-6” Tube and end connector

● 1-Driver bar

● 1-Thumb button

Maintenance and Safety rules:

Only activate saw guard dog button when guard binding will occur or unless making special cuts such as pocket cuts or compound miter cuts, for all other sawing the lower guard should operate automatically as designed without the assistance of the saw guard dog.
Always remove thumb from saw guard dog button after cut is initiated and before it is completed.
Do not run/operate the saw while carrying it at your side.
Lower guard may become opened by accidentally making contact with your clothing.
Accidental contact with the spinning saw blade will result in serious personal bodily injury.
Always hold saw and workpiece firmly, keep hand holding the workpiece and body at least 1 to 2 feet away from the blade at all times so they can’t be accidentally cut.
To ensure the smooth operation of the saw guard dog, keep all saw guard dog moving parts, including the saw’s lower guard bearing-area clean and well lubricated.
Keep work area clear and clean of all debris and away from saw guard dog and saw during use.
(CAUTION! DO NOT BEND THE SAW GUARD DOG STEEL DRIVER)
Any damaged saw guard dog parts should be removed and/or replaced before operating the saw.
When servicing saw guard dog use only identical manufacturer replacement parts.
(WARNING) use of unauthorized parts or failure to follow maintenance and safety instructions may create a risk and serious personal injury.
(PLEASE MAKE CERTAIN THAT THE PERSON WHO IS TO USE THIS EQUIPMENT CAREFULLY READS AND
UNDERSTANDS ALL OF THESE INSTRUCTIONS BEFORE OPERATING BOTH THE SAW GUARD DOG AND SAW).

The product “SAW GUARD DOG” is provided “AS IS”, without any warranty of being error-free or any other expressed, implied. or statutory warranties, including without limitation, any warranty of mechanical ability or fitness for a particular purpose. In no event shall NEW TOOLS, INC.

“SAW GUARD DOG” be liable for any damages whatsoever arising from the use of the product including direct, indirect, consequential, incidental, loss of profits, punitive, or special damages, even if NEW TOOLS, INC. “SAW GUARD DOG” has been notified of the possibility of such damages.
All sales are made on the following conditions: NO Warranty or Guarantee, either expressed or implied is made. Purchaser accepts full responsibility for use and/or resale of these products.